Icon 3D Wall Panel Icon's modern chair design showcased beside a blue and yellow wall
Icon Wall Panel Icon's minimalist yellow wall setup with a matching table and chair
Icon PU wall panel in vibrant orange against a blue wall
Icon's sleek white wall-mounted shelving unit in various sizes
Icon furniture set including a table and chairs against a multi-coloured wall
Icon 3D Wall Panel Icon's modern chair design showcased beside a blue and yellow wall
Icon Wall Panel Icon's minimalist yellow wall setup with a matching table and chair
Icon PU wall panel in vibrant orange against a blue wall
Icon's sleek white wall-mounted shelving unit in various sizes
Icon furniture set including a table and chairs against a multi-coloured wall

Icon

£50.00
/
Tax included. Shipping calculated at checkout.

You can order a sample from our samples page.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Icon 3d wall panel stands out from all other panels because of the chunky geometric design.

The 3D effect of this model is particularly accentuated thanks to the maximum thickness of 40 mm.

The harmoniously balanced design makes CUBE a stylish supplement to the existing collection. Whether for an entire wall, as a targeted interior feature wall, colour accentuation or in combination with lighting.

Priced per 1 panel.

  • Design: ICON
  • Size: 1135 x 380 x 40 mm 0,40m2 /pc
  • Weight: 1.3kg /pc
  • Handy size & lightweight.
  • Polyurethane: a familiar, easy material to use.
  • Finish: White sprayed matt acrylic primer, smooth face.
  • Easy, quick and fast to install.
  • Paint with any quality wall paint.
  • Good soundproofing quality.
  • Heat insulation properties.

MATERIALS REQUIRED  Sandpaper grit 150 or finer, Brush/sponge, Spirit level, Ruler and pencil, Nail clamps or nails; wood strip if necessary, Hammer, Liquid nails type glue, Cartridge applicator, Spacers (e.g. 1-2mm tile crosses) , Battery screwdriver, Spatulas, Circular saw with guide rail, Protective goggles, HDPS/PU saw, Finish paint, Painting tools.

WALL PANELS must be stored flat in a dry place.

The recommended temperature is +15 °C to +25°C with a relative humidity of 45% to 65%.

To achieve optimum results, the products should be fitted under similar moisture and temperature conditions as present after the installation (indoor environment). Fitting on a wet backing surface (fresh plaster) and in forced drying conditions (heat gun, dehumidifier, exceptionally high temperature) are to be ruled out.

Check panels and substrates for suitability. The backing surfaces are suitable: indoor plastered or papered surfaces and coated plaster. Surfaces must be clean, dry, dust-free, degreased and flat; rough down if necessary. If the product is to be applied to particular backing surfaces, please consult our technical department.

Shipping will be calculated during the checkout process.

For example, 1 or 2 boxes of panels will cost £9.95 +vat

More will slightly increase the cost due to the weight and amount of consignment packages.

You may also like

Recently viewed

Back to PU 3d wall panels