Get exclusive access to new products, discount offers, and more!
You can order a sample from our samples page.
Square stands out from all other panels because of geometric design..
The 3D effect of this model is particularly accentuated thanks to the maximum thickness of 30 mm.
The harmoniously balanced design makes SQUARES a stylish supplement to the existing collection. Whether for an entire wall, as a targeted interior feature wall, colour accentuation or in combination with lighting.
Priced per 1 panel.
MATERIALS REQUIRED Sandpaper grit 150 or finer, Brush / sponge, Spirit level, Ruler and pencil, Nail clamps or nails; wood strip if necessary, Hammer, Liquid nails type glue, Cartridge applicator, Spacers (e.g. 1-2mm tile crosses) ,Battery screwdriver, Spatulas, Circular saw with guide rail, Protective goggles, HDPS/PU saw, Finish paint, Painting tools.
WALL PANELS must be stored flat in a dry place.
The recommended temperature is +15 °C to +25°C with a relative humidity of 45% to 65%.
To achieve optimum results, the products should be fitted under similar moisture and temperature conditions as present after the installation (indoor environment). Fitting on a wet backing surface (fresh plaster) and in forced drying conditions (heat gun, dehumidifier, exceptionally high temperature) are to be ruled out.
Check panels and substrates for suitability. The following backing surfaces are suitable: indoor plastered or papered surfaces, coated plaster. Surfaces must be clean, dry, free from dust, degreased and flat; rough down if necessary. If the product is to be applied to particular backing surfaces, please consult our technical department.
Shipping will be calculated during the checkout process.
Example, 1 or 2 boxes of panels will cost £9.95 +vat
More will increase the cost slightly due to the weight and amount of consignment packages.