Interior bedroom showcasing the installation of Cirque 3D PVC wall panels behind the bed
Detail shot of the texture and circular design of the Cirque 3D PVC wall panels
A display of the Cirque 3D PVC wall panels as an elegant living room backdrop
Contemporary living room featuring Cirque 3D PVC wall panels as a statement wall decor
Close-up of a single Cirque 3D PVC wall panel with embossed circles
Decorative Cirque 3D PVC wall panels with a black and white pattern installed on a wall
Interior bedroom showcasing the installation of Cirque 3D PVC wall panels behind the bed
Detail shot of the texture and circular design of the Cirque 3D PVC wall panels
A display of the Cirque 3D PVC wall panels as an elegant living room backdrop
Contemporary living room featuring Cirque 3D PVC wall panels as a statement wall decor
Close-up of a single Cirque 3D PVC wall panel with embossed circles
Decorative Cirque 3D PVC wall panels with a black and white pattern installed on a wall

12 Cirque 3D PVC Wall Panels

£34.99
/
Tax included. Shipping calculated at checkout.

You can order a sample from our samples page.
We will send out one full panel.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

3D PVC Wall Panel. 12 panels per pack (3 m2)

Panel size 500 x 500 x 35 mm.

Our PVC panels are super strong and lightweight too.

Comes in white satin finish.

Easy Installation and paintable in any good quality wall paints.

Install with strong grab adhesive or quality double sided 3M sticky pads.

Ideal for flat walls.

  • Made from high quality PVC
  • Fireproof & waterproof, for use interior & exterior.
  • Smooth white satin finish with sharp detail to the design and edge.
  • Easy Installation, & painted in any colour or paint type.
  • Less crushable than plant fibre wall panels.
  • Do not confuse these panels with Bamboo plant fibre or polystyrene 3D wall panels.
  • Panel size 500x500x35mm.
  • 12 panels per pack = 3 square meters.

Tools required Pencil, tape measure, spirit level, sharp blade and or strong scissors, fine tooth hacksaw blade, construction glue, glue cartridge gun, work bench, safety wear, painting equipment.

  • Make sure your walls are sound, clean and level.
  • Cover floors with dust sheet.
  • Measure wall and mark the centre, mark with a vertical line.
  • Apply adhesive to all the flat areas on the panel back.
  • Apply panel to the wall and apply even pressure to fix.
  • Clean any excess glue from the wall.
  • Cut panels to fit the ceiling and wall edges, sand the cuts with 400 grade sandpaper.
  • Full edges to ceiling and walls with flexible decorators caulk.
  • Paint with suitable wall paint.
  • Plug sockets and light switches can be brought forward from the wall with the addition to an extension collar.

Shipping will be calculated during checkout.

We aim to send out panels within a few days of order.

You will receive a tracking link

3d PVC Wall Panel FAQ

3D PVC wall panels are decorative wall coverings made from polyvinyl chloride (PVC) material with raised or embossed patterns, giving them a three-dimensional appearance. They are lightweight, waterproof, and easy to install.

Installation of 3D PVC wall panels is a straightforward process. You'll need to measure the walls, cut the panels to size, apply construction adhesive to the back of the panels, and press them into place. Some panels may also require additional screws or nails for added security. 3D PVC wall panels are ideally suited to flat walls without lots of corners and windows.

Indeed, painting PVC wall panels is possible. Select a premium wall paint with a high acrylic content. Dulux Diamond Matt stands out as an exceptional choice for all panels. Application should be done with a small velvet roller or a top-notch paint brush.

3D PVC wall panels are waterproof, making them a great choice for areas with high humidity or moisture exposure. However, we do not recommend their use inside a shower area or wet room environment.

To properly clean your 3D PVC wall panels, you'll need a soft microfiber cloth or sponge, warm water, and a mild detergent. Avoid using abrasive cleaners or sponges, as they can scratch or damage the surface of the panels. Instead, opt for a static duster or a brush attachment for your vacuum cleaner. This will ensure that your panels remain in good condition and last for a long time.

It is possible to use 3D PVC wall panels on ceilings as long as they are lightweight and the ceiling is strong enough to support them. Additionally, extra adhesive or fasteners may be needed for a secure installation.

"3D PVC wall panels are a cost-effective and practical solution for creating a 3D wall design. These panels are lightweight, flexible, and easy to install, making them a convenient choice for any homeowner. They are also waterproof and mold-resistant, ensuring long-lasting durability. Additionally, they come in various textures and patterns, providing endless options for creating a unique and personalized wall design."

Some 3D PVC wall panels are designed for outdoor use and can withstand exposure to the elements. However, not all panels are suitable for outdoor applications, so be sure to check the manufacturer's recommendations before installing them outdoors.

With proper care and maintenance, 3D PVC wall panels can last for many years. Their lifespan will depend on factors such as the quality of the panels, the installation method used, and the environment in which they are installed.

Take a look at our other pvc designs.

Recently viewed